WHAT ARE THE BEST VAPE KITS FOR NICOTINE SALT E-LIQUIDS TO BUY IN 2025?

Kicking things off is the Gotek X vape kit by Aspire. This lightweight device is ideal for vaping on the go thanks to its pocket-friendly design, while its 650mAh built-in battery will provide enough charge even when you’re out and about all day. Its 10-13W power output will deliver an authentic MTL (Mouth To Lung) inhale, and it’s easy to use – you can just puff on the mouthpiece to get started!

The Aspire Gotek X replacement pods feature a built-in 0.8 Ohm mesh coil that’ll heat e-liquid evenly for a clearer flavour. The pods are side-filling, so you can top up your vape juice quickly. The pod also features a handy airflow control slider, allowing you to adjust how tight or loose each puff feels.

If you’re after a kit that offers both RDTL (Restricted Direct To Lung) and MTL (Mouth To Lung) vaping, then the Xros 3 is the one for you. Housing a built-in 1000mAh battery, it’ll provide a longer life between charges, compared to similar pocket-friendly devices. Thanks to Pulse Mode, it’ll deliver more power to improve the flavour of each puff. The kit is really simple to use, you can just inhale on the mouthpiece to start vaping.

Xros pods feature built-in coils and are available in a range of resistances from 0.6 Ohm to 1.2 Ohm. Just pop in a lower resistance pod if you want a looser RDTL inhale, and use a high resistance pod for a tighter MTL draw. If you want to customise your vape further, you can adjust the airflow. Thanks to its top-filling design, you won’t even need to remove your pod from the kit to top it up with vape juice.

The Caliburn G3 is part of the popular Caliburn series by Uwell. This powerful, pocket-friendly device supports both MTL and RDTL vaping. It features a simple, single-button design that allows you to quickly adjust its 5-25W power output and experience different levels of vapour. The handy OLED display screen will keep you updated on your settings and battery life.

The Caliburn G3 pod houses a built-in flavour-boosting mesh coil, so you can replace the whole pod once the coil begins to taste burnt. Fill up your pod via its top-filling port – you won’t even need to remove it from your device. Rotate the pod and reconnect it to your device to adjust the airflow and experience a tighter or looser draw. This kit includes one 0.6 Ohm RDTL pod and one 0.9 Ohm MTL pod to get you started.

The Xlim Pro by OXVA is an upgraded version of its predecessor, so if you want a device that’s been tried, tested and improved, then this is your kit. It boasts a 1000mAh built-in battery with a max power output of 30W, allowing you to switch between an MTL and RDTL vape with ease – or, you can stick to Smart Mode, which will automatically recognise the coil and deliver the right amount of power every time.

You’ll receive a 0.6 Ohm and 0.8 Ohm OXVA pod with this kit, but you can also purchase a 1.2 Ohm version separately if you prefer. Either way, the pods feature a top-filling design that allows you to fill up with vape juice without removing it from your device.

If you’re after a simple refillable vape, check out the Geekvape Sonder Q. This device features a buttonless design, so you’ll only need to inhale on the mouthpiece to vape. Its built-in 1000mAh battery can deliver up to 20W of power and you can expect a small amount of vapour with each puff. You can easily tailor how tight or loose your inhale feels by sliding the airflow controller on the side of this kit. Plus, you’ll know when it's time to recharge the Sonder Q, thanks to its LED battery level indicator.

This kit includes a 0.8 Ohm Q pod, but 0.6 Ohm and 1.2 Ohm options are available separately. Each pod houses a built-in coil so you can replace the whole pod with a new one once the coil inside runs out. You can top this pod up with e-liquid by removing its cap and using the e-liquid port on the top of the pod.

The Elfx is a refillable vape based on the original Elf Bar disposables. Boasting a 1000mAh built-in battery, this kit will last around a day between charges. This device will create small amounts of vapour, thanks to its 30W max power output and range of compatible pods. You can also adjust how tight or loose your draw feels using the airflow control slider on its side. With a handy LED battery level indicator, you’ll know when to recharge the device.

Elfx pods house QUAQ mesh coils that boost the flavour of your vape. Since they’re built-in, you can replace the whole pod with a new one once the coil runs out. Remove the rubber stopper on the top of these pods to refill them with 2ml of e-liquid and you’re all set. You’ll find them in 0.6 Ohm, 0.8 Ohm and 1.2 Ohm resistances, so you can experiment with vapour production and find an inhale that suits you.

If you’re looking for something a bit more durable, give the Argus Z by VooPoo a go, it boasts a leak-proof design and sturdy build. It has a 900mAh built-in battery with a fixed 17W output, which will allow for plenty of vaping before needing a recharge, while the built-in safety features will keep you from overcharging the device or over-timing your draw. Plus, the Argus Z features inhale activation, so just puff on its mouthpiece to experience an authentic MTL vape.

This kit comes with a 2ml Argus pod containing a 0.7 Ohm built-in mesh coil, which will heat e-liquid evenly, delivering improved flavour. The coil is built into the pod, so when it needs replacing, you can simply swap out the whole pod. The pod features an air-tight silicone seal that stops it from leaking. Since this kit comes with a free bottle of e-liquid, you can get vaping right away!

Prefer a simpler vape that skips the setup? Go for the Wenax M1. It features an 800mAh built-in battery and a variable 9-16W output that’ll provide a consistent MTL vape, without draining the battery too quickly. Sleek and compact, this device is made to look and feel more like a cigarette, and it features simple inhale activation. Smart Mode selects the best wattage for your chosen pod, which makes this kit easy to use.

Available in two resistances, 0.8 Ohm and 1.2 Ohm, the Wenax M1 pods feature built-in mesh coils that’ll provide a tight MTL or airier RDTL vape. Each pod has a side-filling port, so you can top it up with ease.

Power and simplicity unite with this device, so if you’re looking for an easy-to-use kit that delivers an MTL and RDTL vape, then the Luxe Q2 by Vaporesso is the one for you. It’ll automatically recognise your coil of choice (0.6 Ohm or 1.0 Ohm are included), thanks to Smart Mode – when you inhale, you’ll experience a tight or loose inhale depending on the coil you go for. If you want to adjust how each puff feels even more, slide the airflow control bar to get a precise draw.

Each Luxe Q pod features a built-in mesh coil, which is designed to heat e-liquid evenly for an improved flavour in every puff. The pods are top-filling, so you won’t even need to remove them from the device to add your vape juice. When your coil is finished, you can experiment with multiple different resistances from the full Luxe Q2 coil range.

The Vaporesso Xros Pro is a simple device that can be customised as much or as little as you’d like. Housing a large built-in 1200mAh battery, this vape can provide up to 30W of power, which makes it ideal for MTL, RDTL and DTL vaping. Plus, the battery can be quickly recharged in as little as 35 minutes! Pop your pod in and inhale on the mouthpiece to get started. Or for a tailored approach, swap between Normal, Power and Eco Modes.

Xros pods house flavour-boosting mesh coils and since they’re built-in, you can swap your whole pod with a new one once the coil begins to taste burnt. This pod can be topped up via its top-filling port without needing to remove it from your device – minimising the risk of spills. You’ll find the Xros pods in 0.4 Ohm - 1.2 Ohm resistances, so it’s easy to experiment with different vaping styles.