528 Custom Vapes Goon 25mm RDA

The Goon 25mm RDA by 528 Customs has been designed for one thing - more vapour. A re-design of the classic Goon RDA, the 25mm is bigger than ever and features a bridge build deck that can fit larger coils and supports dual coil builds. When it comes to mod compatibility, a gold-plated 510 is fitted as standard (for a faster ramp-up), plus a Stainless Steel squonk pin is also included, so you can pair this Rebuild Dripping Atomiser with most vape mods on the market.

Features:

• 25mm RDA
• Two Post Bridge Build Deck
• Supports Dual Coil Builds
• Heat-Sink Design
• Squonk Compatible
• Adjustable Dual Airflow
• Wide Bore Drip Tip

A larger diameter means a bigger build deck, which in turn makes fitting your coils easier as you’ll have more room to work. The large terminal holes on each bridge post also mean you can fit big and small rebuildable coils, while stainless steel screws ensure a constant connection. Designed to focus heat, the Goon features PEEK insulators as well as an Ultem coating on the inside of the top cap - this ensures that heat stays with the coils and doesn’t travel outside the deck or to the drip tip.

Looking to experience a tighter or looser inhale? Thanks to the adjustable dual airflow you have full control to increase or restrict vapour flow and discover an inhale that suits you. Three airflow holes on each side of the RTA sit directly behind each coil which means air hits the coil with every inhale for better flavour and increased vapour production. You can remove the wide bore drip tip to quickly drip more e-liquid, plus the juice well leaves plenty of room for your cotton wicks.

Overall, the Goon combines modern technology with a rugged build that ensures this RDA can deliver a quality vape.

Contains:

• 528 Customs Goon 25mm RDA
• Gold-Plated 510 Pin (Pre-installed)
• Stainless Steel BF Pin
• Spares Pack

Important information about Rebuildable Dripping Atomisers:

Rebuildable atomisers are recommended only for experienced users. You should have the knowledge and access to the equipment that is required to set up this atomiser properly.

Before building coils or using an RDA you should have a thorough knowledge of battery safety, Ohm's Law and vaping in general.

Before fitting a coil onto your rebuildable atomiser ensure it is in a safe condition and registering the correct Ohmage, this testing and checking can be achieved by using a dedicated Ohmmeter. Coils should not be tested on vape devices.